Enhanced Rock Weathering Explained: How Spread Rock Earns Carbon Credits
Enhanced rock weathering speeds up a natural reaction that pulls carbon dioxide out of the air. Here is how projects measure it, where the numbers are uncertain and what buyers should check.
Enhanced rock weathering (ERW) is a carbon removal method that spreads finely ground silicate rock on farmland, forest soils or coastal sediments so that natural chemical reactions draw carbon dioxide out of the air. Rainwater and soil water slowly dissolve minerals such as basalt, and the dissolved products carry carbon into the soil and eventually into rivers and the ocean, where it can stay stored for long periods. The process happens on its own in nature, which is the reason it is attractive: a project speeds up a reaction that already runs, rather than inventing a new one. It is also slow, and that slowness is why the credits are hard to measure.
A project earns credits by estimating how much carbon the applied rock has removed. The estimate starts with the quantity of rock spread, its mineral content and how much of that mineral is expected to dissolve over the crediting period. The project then subtracts the emissions from mining, grinding, transporting and spreading the rock. Each step is a place where the number can be wrong. For that reason, most methodologies ask projects to measure the inputs carefully and to model the outcome, rather than claiming a direct measurement of the carbon removed.
Soil sampling is the main tool for checking the outcome. Samples are taken before application and again at later dates, then analysed for the remaining mineral and for the inorganic carbon that the reaction has produced. The change is small compared with natural variation within a field, so sampling needs many points, a clear grid design and repeat visits. Some projects add field trials, drainage measurements or chemical tracers. These can improve confidence, but they are costly and usually cover small areas, so they cannot replace a well-designed sampling programme across the whole project.
Where the carbon goes after it leaves the field is the second question. Part of the dissolved carbon travels with water into streams, rivers and the sea. A credit that counts only the soil step can overstate the removal, because some of the carbon is still in transit when the credit is issued. A credit that counts the full downstream path needs monitoring beyond the farm boundary, which is harder to do and more expensive. Buyers should check whether the methodology accounts for the water pathway and how long the carbon is expected to remain stored once it reaches the sea.
Rock dust is not neutral. Depending on the source, it can raise soil pH and may carry trace metals such as nickel or chromium into the soil. Credible methodologies require testing of the feedstock, limits on the metals that are allowed and checks on crop and water quality. These effects are not automatically harmful, but they have to be tested rather than assumed. A project that cannot show its feedstock test results should not be treated as low risk.
Additionality and baseline work differently from a forest project. Because ERW speeds up weathering that would partly occur anyway, the question is not whether any carbon is removed but how much of it is more than the land would have captured without the rock. The baseline should describe the soil's existing weathering and carbon behaviour, and the credit should count only the increment. Permanence is generally stronger than for a tree planting project, because the carbon is held in mineral form, but it still depends on the rock remaining in the soil and on the downstream pathway behaving as the model predicts.
Net removal is the figure that matters. Mining, grinding and hauling rock use energy, and that energy often comes from fossil fuels. The gross removal of a project therefore has to be reduced by these emissions before a credit is issued. A registry should see the figure per tonne of rock, along with the assumptions behind it. If a project reports only the gross number, the credit overstates what the atmosphere actually loses.
Five questions cover most of the risk. Which methodology and registry issued the credits, and can the project's documents be found there? How was the mineral content of the rock measured, and by whom? What sampling design was used, how many points were taken and how often were they repeated? Were the feedstock metals and soil effects tested, and are the results published? Does the methodology include the downstream water pathway, and is the net figure reported after transport and grinding emissions are subtracted? A clear answer to each of these is a better guide to quality than the headline tonnage.
More on CDR
Citi Structures $72M Bond Tied to Verified Carbon Removal
The transaction links debt repayment to measurable outcomes at a Texas biochar project, establishing a performance-based model for carbon removal financing.
Timber Carbon Deploys AI to Quantify Building Material Carbon Storage
The move addresses a critical gap in carbon removal verification, bringing algorithmic precision to tracking long-term CO2 sequestration in construction.
Fluvial Carbon Removal: CarbonRun Eyes Quebec Waterway for Sequestration
A Nova Scotia developer is exploring an unconventional pathway to deploy carbon dioxide removal by leveraging river chemistry in eastern Canada.