Direct Air Capture Carbon Credits Explained: How Machines Remove CO2 From the Air
Direct air capture pulls CO2 from the air and stores it, usually underground. It is among the most durable forms of removal, and among the most expensive.
Direct air capture (DAC) uses machines to pull carbon dioxide out of ambient air. The captured CO2 is then stored, usually in deep geological formations, or used in products. When the CO2 is stored, the process is usually called direct air capture with carbon storage (DACCS). Because the carbon comes from the air rather than from a smokestack, DAC is treated as carbon removal rather than as avoided emissions.
That distinction matters for buyers. A credit for avoiding emissions reduces the flow of new greenhouse gases. A removal credit represents CO2 that has already been taken out of the atmosphere and is held somewhere. The CarbonUnits explainer on avoidance versus removal describes DAC with storage in exactly these terms: machines pull CO2 from the air and inject it underground.
How a DAC plant works
Air is drawn through a unit containing a sorbent or solvent that binds CO2. The material is then treated, typically with heat, to release a concentrated stream of CO2. That stream is compressed and transported to a storage site, and the sorbent is reused in the next cycle. Moving large volumes of air and running the release and compression steps both need substantial energy, which is why the source of that energy is central to any DAC credit.
Why it is moving into carbon markets
Regulation is the clearest signal. In February 2026 the European Commission adopted the first certification methodologies under the Carbon Removals and Carbon Farming Regulation. They cover three technologies: DACCS, biogenic emissions capture with storage (BioCCS) and biochar carbon removal. The framework defines what counts as a tonne of removed CO2 and sets requirements for durability, risk mitigation, leakage management and liability.
Corporate buyers are also purchasing. Google reported in February 2025 that it had procured 121,714 tCO2e from three direct air capture projects, all in the United States. That was one of four removal categories in a total of 790,912 tCO2e across its portfolio at the time.
Operating experience is growing too. Climeworks runs industrial DAC facilities at Hellisheiði in Iceland, and commentary on that site points to lessons on costs, permanence verification and integration with geothermal heat.
The cost problem
Cost is the main constraint. A CarbonUnits article from June 2025 put engineered removals such as DAC at upwards of $600 to $1,000 per tonne of CO2 removed. Many nature-based projects in the same discussion were still below $50 per tonne. A separate CarbonUnits comparison from September 2025 notes that DAC operates at a small scale and is limited by high energy requirements and infrastructure constraints.
Those figures explain why DAC credits are far more expensive than most nature-based credits. They also explain why most buyers use DAC as one part of a portfolio rather than as their only source of removals.
Permanence is what buyers pay for
A Cambridge study covered by CarbonUnits in October 2025 found that engineered DAC with geological storage offers far greater permanence than nature-based removal, but remains costly and difficult to scale. The study's authors argued that portfolios can combine expensive permanent solutions such as DAC with lower-cost nature-based removals, provided the right buffers are built in.
The reason is storage. CO2 injected into suitable rock formations is meant to stay there for very long periods. Trees and soils can burn, be cut or decay, which is why nature-based removals carry reversal risk that has to be managed through monitoring and buffer pools. For a buyer who needs a durable claim, the permanence of geological storage is the core of the product.
What buyers should check
Start with storage. Ask where the CO2 is injected, who holds the storage site, and how long the operator must monitor it. A permanence claim is only as strong as the monitoring behind it.
Next, check energy. Ask which power source runs the plant and whether the emissions from that power are counted in the net removal figure. A DAC plant that runs on high-emission electricity removes less CO2 than its gross capture suggests.
Then check the method and the registry. A DAC credit used for EU compliance should follow the EU certification methodology for DACCS. A voluntary credit should name its methodology and registry, and show that it has been independently verified. Confirm whether the credit is already issued or only contracted for future delivery, and which vintage it belongs to.
Conclusion
Direct air capture is the most engineered form of carbon removal. It offers the strongest storage case but the highest price and the smallest scale. Regulation and early corporate purchases show that buyers are willing to pay for that permanence. Before relying on a DAC credit, buyers still need to test the storage, the energy and the measurement method behind it.
More on CDR
Biochar Carbon Credits Explained: How Pyrolysis Turns Waste Biomass Into Removal
Biochar credits turn waste wood, crop residues and manure into carbon removal, but only if the product is stable and production emissions are subtracted. Here is what to check.
Enhanced Rock Weathering Explained: How Spread Rock Earns Carbon Credits
Enhanced rock weathering speeds up a natural reaction that pulls carbon dioxide out of the air. Here is how projects measure it, where the numbers are uncertain and what buyers should check.
Citi Structures $72M Bond Tied to Verified Carbon Removal
The transaction links debt repayment to measurable outcomes at a Texas biochar project, establishing a performance-based model for carbon removal financing.